Instrument Control Panel Parts
AT-16 RTD Input Board
Part #25226
Used in the DDC to read all the temperature probes.

 
Advantech Computer
Part #25262
DDC Computer loaded with DDC software, floppy drive cables, and video card. (Does not include data acquisition card).

 
Air Solenoid - 2 Way
Part #65697
1/8" NPT, 115 volt AC. 2-way - NC

 
Air Solenoid - 3 Way
Part #65698
1/8" NPT, 115 VAC.

 
Air Supply Regulator with Gauge
Part #66306
Maintains high air flow with steady pressure control with minimal pressure drop. Fluctuations in secondary pressures are minimal, regardless of fluctuations in primary pressures. Secondary pressure range: 5 to 125 PSIG. NPT size: 1/4".

 
Alarm Horn
Part #30975
Warning device for flame failure, duration of process cycle, etc., 120 VAC.

 
Alarm Horn
Part #30080
Warning device for: flame failure, duration of processing cycle, set point changes, time for internal temperature check, etc., 120VAC, 125 AMP., 50/60 Hz.

 
Board
Part #25220
Board PC to I/O mounting rack, G4AC50PT022. For use in DDC standard system.

 
Board
Part #25197
Board DT2815, data acquisition. For use in DDC standard system.

 
Board
Part #25225
Board A108-P, MLC-AD12-8P. For use in DDC standard system.

 
Board, Pentium
Part #25306
Pentium Motherboard, PCA-61541 for use in all DDC systems: standard, modicon, and windows

 
Button
Part #31676
E-Stop button, illuminated

 
 
Calibration Resistor
Part #70594
Calibrate DDC Modicon to 230 F.

 
Calibration Resistor
Part #70595
Calibrate DDC Modicon to 100 F.

 
Card
Part #25246
Card SVGA 1078 x 768 Advantech PCA-6141. For use in DDC standard system.

 
Circular Chart Recorder Ink
Part #25082
For use with Bristol Recorder (2.5 oz bottle)
Red Ink (1 bottle)
Note: Please specify ink number.

 
Circular Chart Recorders Ink
Part #25051
For use with Bristol Recorder (2.5 oz bottle)
Blue Ink (1 bottle)

 
Circular Recorder Charts
Part #25120
Honeywell : Packed 100 charts per box. All charts 24 hour.
Range 0 - 200 F
11-1/2" diameter chart
Note: For Drying Room charts please specify chart number

 
Circular Recorder Charts
Part #25139
Honeywell: Packed 100 charts per box. All charts 24 hour.
Range 0 - 200 F
For microprocessors, 10-1/2" diameter chart
Note: For Drying Room charts please specify chart number

 
Circular Recorder Charts
Part #25156
Partlow: Packed 100 charts per box. All charts 24 hour. Range: 30 - 230 F
Note: For Drying Room charts please specify chart number

 
Circular Recorder Charts
Part #25162
Bristol: Packed 100 charts per box. All charts 24 hour.
Range: 60 - 180 F
Note: For Drying Room charts please specify chart

 
Circular Recorder Charts
Part #25155
Bristol: Packed 100 charts per box. All charts 24 hour.
Range: 0 - 400 F
Note: For Drying Room charts please specify chart

 
Circular Recorder Charts
Part #25136
Honeywell: Packed 100 charts per box. All charts 24 hour.
Range 50 - 250 F

 
Circular Recorder Charts
Part #25032
Partlow: Packed 100 charts per box. All charts 24 hour.
Range: 50 - 250 F
Note: For Drying Room charts please specify chart number

 
Circular Recorder Charts
Part #25291
Honeywell: Packed 100 charts per box. All charts 24 hour.
Range 0 - 150 C
Note: For Drying Room charts please specify chart number

 
Circular Recorder Charts
Part #25075
Bristol: Packed 100 charts per box. All charts 24 hour.
Range: 40 - 240 F
Note: For Drying Room charts please specify chart

 
Circular Recorder Charts
Part #25031
Partlow: Packed 100 charts per box. All charts 24 hour.
Range: 0 - 350 F
Note: For Drying Room charts please specify chart number

 
Connector - Block - #UMS
Part #31345
For use in Alkar DDC control panels

 
Connector - Plug - #MVST
Part #31346
For use in Alkar DDC control panel

 
Contact Blocks
Part #30551
Contact blocks for electrical, and stop/start push-button switches. 10 AMP., 600 Volt.
Normally closed

 
Contact Blocks
Part #30550
Contact blocks for electrical and stop/start push-button switches. 10 AMP., 600 Volt.
Normally open

 
Controller
Part #25300
Microprocessor LFP-100

 
 
Controller
Part #25266
DC2030B-EE-20-11-0A00000-00-0

 
 
Cooler, Vortex
Part #31184
Air cooler for use in DDC Modicon.

 
Corrosion Inhibitor
Part #30910
Used for control of corrosion in instrumentation controls.

 
Delay Start Timer
Part #30082
Used for special application only. Delay start of Wet Bulb set point or preset time (in seconds) allowing Dry Bulb to reach set point first. 115 VAC, 10 AMP rated.

 
Desiccant Dehydrator Dryer Unit
Part #65093
A manual compressed air dryer unit, that indicates replacement of regeneration of desiccant crystals by changing from blue to pink within the transparent bowl window. Dryer unit includes two (2) bags of desiccant. Additional bags of desiccant may be ordered.

Desiccant Bowl Specifications
Capacity: 1.74 pounds
Temperature rating: up to 125 F
Pressure rating: up to 150 PSIG
 

Dryer Specifications
Dries up to 4400 standard cubic feet at 70 F (saturated inlet air temperature) at 100 PSIG
 

Dessicant Crystals
Part #65094
Replacement dessicant crystals for Dessicant Dehydrator Dryer Unit. Two bags are required. Price is per bag.

 
Digital I/O Board
Part #25216
For use with the plug-in modules to control the DCC input/output. (Pre Modicon)

 
Door Interlock
Part #30863
Instrument panel interlock switch. Used for all instrument control panels.

 
Dry Bulb Controller
Part #25095
Three mode (for Steam Heated Ovens only). This part is OBSOLETE.

 
Dry Bulb and Wet Bulb Sensor
Part #25127
20 ft RTD Dry Bulb and Wet Bulb Sensor.

 
Electrical Switch
Part #30894
2-Position with contact block.

 
Electrical Switch
Part #30897
3-Position with contact block.

 
Fan Cord
Part #31181
Use with biscuit fan part no. 31179.

 
 
Fan, Biscuit
Part #31179
For DDC panels.

 
Finger Guard
Part #31180
Use with biscuit fan part no. 31179.

 
Floppy Drive 3.5
Part #25245
For use in Alkar DDC and WonderWare controls.

 
Hard Drive
Part #25263
20 gb hard drive for use in DDC and WonderWare controls.

 
Honeywell Chart Recorders
Part #25236
A self-contained, enclosed, temperature recording chart unit.
Electrically operated (115 VAC, 1ph, 60 Hz.)
24 Hour military time print (15 min. intervals) circular chart
Facilities for locking/sealing the chart
Replaces AR100 Series
Model DR4200 is available in a one-pen or two-pen version. This recorder includes a self-test feature that checks the operational status of Major Functions.
2-Pen recorder/controller. Used for back-up control on microprocessor control panels (DR4200 EV2)
 
Honeywell Chart Recorders
Part #25128
A self-contained, enclosed, temperature recording chart unit.
Electrically operated (115 VAC, 1ph, 60 Hz.)
24 Hour military time print (15 min. intervals) circular chart
Facilities for locking/sealing the chart
Replaces AR100 Series
Model DR4300 is available in a one-pen or two-pen version. This recorder includes a self-test feature that checks the operational status of Major Functions.
2-Pen recorder (DR4312)
 
Honeywell Chart Recorders
Part #25141
A self-contained, enclosed, temperature recording chart unit.
 
  • Electrically operated (115 VAC, 1ph, 60 Hz.)
  • 24 Hour military time print (15 min. intervals) circular chart
  • Facilities for locking/sealing the chart
  • Replaces AR100 Series. Model DR4300 is available in a one-pen or two-pen version. This recorder includes a self-test feature that checks the operational status of Major Functions.
    1-Pen recorder (DR4311)
    Note: Please specify recorder part number.
Honeywell Chart Recorders
Part #25171
A self-contained, enclosed, temperature recording chart unit.
Electrically operated (115 VAC, 1ph, 60 Hz.)
24 Hour military time print (15 min. intervals) circular chart
Facilities for locking/sealing the chart
Replaces AR100 Series
Model DR4200 is available in a one-pen or two-pen version. This recorder includes a self-test feature that checks the operational status of Major Functions.
1-Pen recorder/controller. Used for iternal temperature control on standard panel, back-up control on microprocessor control panels (DR4200 EVI)
 
Indicating Bulb
Part #30871
Replacement in control panel.
Bayonet socket - 4 watt, 120VAC

 
Indicating Bulb
Part #30252
Replacement in control panel.
Screw socket - 6 watt, 120VAC

 
Indicating Light Socket Assembly
Part #30895
Complete with twist type socket and indicator bulb. 4 Watt, 120 VAC. Lense color: green.
Green lense

 
Indicating Light Socket Assembly
Part #30893
Complete with twist type socket and indicator bulb. 4 Watt, 120 VAC. Lense color: red.
Red lense

 
Internal Control Regulator Control Panel
Part #30898
0-30 psi. 1/4" NPT

 
Internal Temperature Controls
Part #25238
DC230L-E0-00-10
Used for internal temperature alarm or limit

 
Internal Temperature Controls
Part #25237
DC230B-EE-00-10
Used on Standard and Jumo control panels for wet and dry bulb controllers.

 
Internal Temperature Probe
Part #25163
RTD Probe to monitor internal temperature of product. 3 wire, 25 ft long lead.

 
Internal Temperature Probe
Part #25121
Probe to monitor internal temperature of product (type J).
25 foot

 
Internal Temperature Probe
Part #25288
RTD Probe to monitor internal temperature of product. 3 wire, 32 ft long lead.

 
Internal Temperature Probe
Part #25293
To measure internal temperature of hot dogs.

 
Internal Temperature Probe
Part #25142
Probe to monitor internal temperature of product (type J).
12 foot

 
Junction Box Enclosure
Part #31755
8" x 10", 3 pen and 4 pen

 
Junction Box Enclosure
Part #31756
10" x 12"

 
Junction Box Enclosure
Part #31693
6" x 6", 1 pen and 2 pen

 
Junction Box Enclosure, 10
Part #45072
Obsolete. Replaced by part # 31756

 
Junction Box Enclosure, 6
Part #45052
Obsolete. Replaced by part # 31693
 
Junction Box Enclosure, 8
Part #45074
Obsolete. Replaced by part # 31755

 
Junction Box Internal Panel, 10
Part #45073

 
Junction Box Internal Panel, 6
Part #45053
Available in 1-pen and 2-pen.

 
Junction Box Internal Panel, 8
Part #45075
Available in 3-pen and 4-pen.

 
Junction Box Thermocouple Type J Wire
Part #30935
A special wire (Iron-Constantan). Available for pens:
 
Pens Quantity
1-Pen 100'
2-Pen 200'
3-Pen 300'
4-Pen 400'
Keypad
Part #31171
For use in Alkar Modicon DDC.

 
Latch
Part #75335
Large knob style, E3-10-505-50

 
 
Memory Module
Part #31542
For PLC based controls.

 
Microalescer Replacement Filter, Type C
Part #66353
Replacement filter only. (Coarse)

 
Microalescer Replacement Filter, Type D
Part #66352
Replacement filter only.
(Fine) Old Type D

 
Microalescer Replacement Filter, Type D
Part #66430
Replacement filter only.
(Fine) New Type D

 
Microalescer with Filter, Type C
Part #65100
Baffling system for removing liquids (water & oil) and dirt particles mechanically. Quick-disconnect clamp ring on metal bowl. Metal bowl features level gauge and 11 oz. capacity. Comes with Type "C" coarse, 0.01 micron filter. Replacement filters may be ordered.

 
Microalescer with Filter, Type D
Part #66305
Baffling system for removing liquids (water & oil) and dirt particles mechanically. Quick-disconnect clamp ring on metal bowl. Metal bowl features level gauge and 11 oz. capacity. Comes with Type "D" fine, 0.003 micron filter. Replacement filters may be ordered.

 
Modicon Battery
Part #25274

 
Modicon PLC
Part #25268
Modicon micro CPU, programmable logic controller. Applications include: DDC systems, CIP systems, hydraulic systems, and Panelmate systems. (Order battery separate). Lithium battery 110xcp-98000.

 
Modicon Rack
Part #25269
5 slot for DDC Dos versions.

 
Module
Part #25295
Discreet input module

 
Module
Part #31531
Output module

 
Module
Part #31533
Analog module

 
Module
Part #31534
RTD input module.

 
Module
Part #31532
Input module, ac/dc

 
Mouse
Part #25304
For DDC and WonderWare controls.

 
Nameplate
Part #30530
Alarm Silence nameplate

 
 
Nameplate
Part #31249
Program Lock Off On nameplate

 
 
Nameplate
Part #31248
Backup Off On nameplate

 
 
Nameplate
Part #31227
Power Off On nameplate

 
 
Nameplate
Part #31222
Power On nameplate

 
 
Nameplate
Part #31111
Door Closed nameplate

 
 
Nameplate
Part #31110
Door Open nameplate

 
 
Nematron Computer
Part #25302
For DDC and WonderWare controls.

 
Output Board, DT 757
Part #25224
4-20 ma. output board, cable included.

 
Oven Temperature Chart Recorder
Part #25071
Bristol Recorder. This part is now OBSOLETE and is no longer available. A replacement part and kit is now available. See part number 91018 for this kit. Do not order part no. 25071.

 
Oven Temperature Chart Recorder Parts
Part #05206
Chart drive motor for Honeywell chart recorders

 
Oven Temperature Chart Recorder Parts
Part #25074
Replacement parts for the Oven Temperature Chart Recorder.

Pen Point Cleaning Wire (1)

 

Oven Temperature Chart Recorder Parts
Part #25073
Replacement parts for the Bristol Oven Temperature Chart Recorder.

Chart Drive Motor

 

Oven Temperature Chart Recorder Parts
Part #25067
Replacement parts for the Oven Temperature Chart Recorder. Replacement Pen Arms, Short (Wet Bulb)

 
Oven Temperature Chart Recorder Parts
Part #25069
Replacement parts for the Oven Temperature Chart Recorder.

Replacement Pen Points, Long (Dry Bulb)

 

Oven Temperature Chart Recorder Parts
Part #25068
Replacement parts for the Oven Temperature Chart Recorder.

Replacement Pen Points, Short (Wet Bulb)

 

Oven Temperature Chart Recorder Parts
Part #25119
Replacement parts for the Oven Temperature Chart Recorder.

Chart Holding Hub

 

Oven Temperature Chart Recorder Parts
Part #25066
Replacement parts for the Oven Temperature Chart Recorder. Replacement Pen Arms, Long (Dry Bulb)

 
Oven Temperature Chart Recorder Parts
Part #25108
Replacement parts for the Oven Temperature Chart Recorder.

Door Handle/Latching Assembly

 

Panelmate Series 1000
Part #25277
The Panelmate unit is a video control panel that will interface with a single PLC or multiple PLCs on a network. The unit is a single piece construction with front touchpanel and controls.

 
Partlow Replaceable Felt Tip Pens
Part #25157
Partlow Rec. Controller:RED
Packaged 5 per pack.
Note: Please specify color number. For other internal replacement parts, specify recorder type and part number or section "D" for additional parts.

 
Partlow Replacement Pen Arms
 
Can be ordered on request. Allow 4 weeks delivery. Long Arm.
 
 
Partlow Replacement Pen Arms
 
Can be ordered on request. Allow 4 weeks delivery. Short Arm.
 
 
Pilot Light
Part #30257
Pilot light - Green lens only

 
Pilot light
Part #30255
Pilot light - Red lens only

 
Plug-In Modules
Part #25271
Modicon expansion modules for DCC control panel. When ordering module, refer to the number printed above wiring terminals.
Analog Output Card 202

 
Plug-In Modules
Part #25218
Used to control the inputs/outputs for the DDC computer. Used on Advantech computers (pre-1996)
AC Input Module - Yellow

 
Plug-In Modules
Part #25217
Used to control the inputs/outputs for the DDC computer. Used on Advantech computers (pre-1996)<
DC Output Module - Red

 
Plug-In Modules
Part #25219
Used to control the inputs/outputs for the DDC computer. Used on Advantech computers (pre-1996)<
AC Output Module - Black

 
Plug-In Modules
Part #25272
Modicon expansion modules for DCC control panel. When ordering module, refer to the number printed above wiring terminals.
A.C. Output Card 208

 
Plug-In Modules
Part #25270
Modicon expansion modules for DCC control panel. When ordering module, refer to the number printed above wiring terminals.
RTD Input Card 204
 
Plug-In Time Delay Relay
Part #30881
Delay Start Timer. Also, must order timer base #31653.

 
Plug-In Timer Base Only
Part #31653
Timer base for use with Plug-In Time Delay Relay #30881.

 
Pneumatic Switch
Part #30233
For manual control panels. Available for fresh air and exhaust damper

 
Pneumatic Switch
Part #30233
For manual control panels. Available for smoke cook and steam cook switch.

 
Potentiometer
Part #31104
Potentiometer P1004-13, 5 MEG OHMS

 
 
Potentiometer
Part #31213
Potentiometer, SSAC Inc. VTP5N

 
 
Power Supply
Part #31539
For PLC based controls.

 
Pressure Gauge
Part #25259
Liquid filled, 3-15 psi control output. For use in DDC, PLC, and WonderWare controls.

 
Pressure Indication Gauge
Part #25118
2" Dial. 0-60 psi range.

 
Pressure Indication Gauge
Part #25003
2" Dial. Available in 0-30 psi range.

 
Processor
Part #31543
For PLC based controls.

 
Pushbutton
Part #30890
Pushbutton, ABD110N-B

 
 
Pushbutton
Part #30891
Pushbutton, red

 
 
RTD Dry Bulb and Wet Bulb Probe
Part #25267
Measures Dry Bulb and Wet Bulb temperature and sends signal back to microprocessor.
Monel 400 Sheath

 
RTD Dry Bulb and Wet Bulb Probe
Part #25201
Measures Dry Bulb and Wet Bulb temperature and sends signal back to microprocessor.
Single element sensor

 

Quantity Needed:
RTD Dry Bulb and Wet Bulb Probe
Part #25255
Measures Dry Bulb and Wet Bulb temperature and sends signal back to microprocessor. (15 ft)
Dual element sensor

 
Recorder Replacement Kit
Part #91018
This kit is a replacement kit for Bristol Recorder part no. 25071 which is now obsolete and is no longer available. Part no. 25128 along with installation materials, junction box, probes, and filler plate is a complete kit to replace part no. 25071. This new replacement kit is ALKAR part no. 91018. Appropriate drawing will be included in the kit. Field installation and wiring is approximately 2 - 3 days.

 
 
Regulator
Part #30898
Internal control regulator--control panel. 0-30 PSI. 1/4" NPT.

 
Relay
Part #30939
Relay RY4S-U-AC 120V IDEC

 
 
Relay
Part #31137
Relay, midget power latching RH2LB120VAC

 
 
Relay
Part #31143
Relay, IDEC RH1B-U 120VAC

 
 
Relay
Part #30225
8-Pin, Plug-in style, D.P.D.T. contact arrangement. 115 VAC, 10 AMPS. Mechanical tests indicate a life expectancy of more than 10 Million operations.

 
Relay Base
Part #30573
8-Pin, for use with Relay, part number 30225. 115 VAC, 10 AMP rated.

 
Relay Board
Part #25301
Board relay LPF-100

 
 
Replaceable Felt Tip Pens
Part #25115
Bristol: Blue Packaged 6 per pack.

 
Replaceable Felt Tip Pens
Part #25158
Partlow: Green Packaged 5 per pack.

 
Replaceable Felt Tip Pens
Part #25135
Honeywell : Purple (long). Packaged 6 per pack.

 
Replaceable Felt Tip Pens
Part #25114
Bristol:red
Packaged 6 per pack.

 
Replacement Felt Tip Pens
Part #25114
Honeywell:red (short)
Packaged 6 per pack.

 
Resistor
Part #31125
Resistor, metal oxide varsitor

 
 
Retrofit
Part #45144
Setpoint retrofit assembly

 
 
Rheostat
Part #31289
Rheostat, 100 OHM 25 watt

 
 
Set Point Process Temperature Gauge
Part #25165
3-1/2" Dial, 40-240 F range. Standard accuracy style. Special degree gauges are available upon request.
Note: When ordering a replacement lense, a description is required. Example: Plastic (or glass), flat (or curved), O-ring seal, or (seal: none), snap-in type (or screw-on type).

 
Set Point Process Temperature Gauge Lens
Part #25166
Replacement 3-1/2" Lens Flat plastic w/O-ring seal.

 
Set Point Regulator
Part #30247
Utilizes the null-balance principle, which holds the oven or steam cooker temperature constant. 0-15 PSI. 1/8" NPT

 
Set Point Timer, 10 hour dial range
Part #30087
Time ranges are knob adjustable and have a process pointer. The process pointer is red and displays the remaining time interval. 102-132 VAC, 60 Hz., output rating: 10 Amps at 120 VAC.
 
  • Dial Range 10 hrs.
  • Minimum Setting 20 min.
  • Dial Divisions 10 min.
  • Repeat Accuracy +/- 3 min
Set Point Timer, 150 minute dial range
Part #30085
Time ranges are knob adjustable and have a process pointer. The process pointer is red and displays the remaining time interval. 102-132 VAC, 60 Hz., output rating: 10 Amps at 120 VAC.
 
  • Dial Range 150 min.
  • Minimum Setting 4.5 min.
  • Dial Divisions 2 min.
  • Repeat Accuracy +/- 45 sec.
Set Point Timer, 5 hour dial range
Part #31033
Time ranges are knob adjustable and have a process pointer. The process pointer is red and displays the remaining time interval. 102-132 VAC, 60 Hz., output rating: 10 Amps at 120 VAC.
 
  • Dial Range 5 hrs.
  • Minimum Setting 9 min.
  • Dial Divisions 3 min.
  • Repeat Accuracy +/- 1.5 sec.
Set Point Timer, 60 minute dial range
Part #30084
Time ranges are knob adjustable and have a process pointer. The process pointer is red and displays the remaining time interval. 102-132 VAC, 60 Hz., output rating: 10 Amps at 120 VAC.
 
  • Dial Range 60 min.
  • Minimum Setting 2 min.
  • Dial Divisions 1 min.
  • Repeat Accuracy +/- 18 sec.
Shower Miser Timer
Part #31501
Intermittently turns the cold shower system on or off at timed intervals to conserve water during the shower cycle.

 
Shower Miser Timer Base
Part #31502
For use with the Shower Miser Timer, #31501.

 
Shower Miser Timer Latch Kit
Part #31503
Latch Kit only

 
Shower Miser Timer, Panel Mounted
Part #30948
Both "ON" and "OFF" time intervals are individually adjustable by concentric knobs on the front of the timer. The combination of "ON" and "OFF" time is total time cycle of the unit. 102-132 VAC, 50/60 Hz., output rating: 10 Amps at 120 VAC.

 
Signal Conditioner
Part #31389
API-4003G-I, 4-20 MA

 
 
Sock
Part #50048
Wet Bulb sock,11-1/2" x 4-1/2", Sold 100 per Package

 
 
Socket
Part #31144
Relay socket

 
 
Socket
Part #31138
Relay socket

 
 
Socket
Part #30940
Relay socket,4PDT

 
 
Switch
Part #31247
Switch, key lock ASD2K10N IDEC

 
 
Switch
Part #30892
Switch ASD211N

 
 
Temperature Range Transmitters
Part #25148
40-240 F range. 1/2 % accuracy gauges. Note: Special temperature range transmitters available upon request.
This part is OBSOLETE.

 
Temperature Range Transmitters
Part #25232
Low temperature range transmitter. Range 0 - 100 F. This part is OBSOLETE.

 
Temperature Range Transmitters
Part #25231
Temperature range transmitter in degrees Centigrade. Range 0 - 150. This part is OBSOLETE.

 
Temperature Range Transmitters
Part #25079
40-240 F range.Standard accuracy gauges. Note: Special temperature range transmitters available upon request. This part is OBSOLETE.

 
Terminal Block
Part 31017
Terminal Block #31017 and terminal connectors #31015 and #31016 are obsolete and are replaced by part #31609

 
 
Terminal Connector
Part #31016
Terminal Block #31017 and terminal connectors #31015 and #31016 are obsolete and are replaced by part #31609

 
 
Terminal Connector
Part #31015
Terminal Block #31017 and terminal connectors #31015 and #31016 are obsolete and are replaced by part #31609

 
 
Time Delay Relay
Part #30782
N.C. Relay. (MCR120A1X1Q-2). A solid state printed circuit board with mechanical relay used to complete circuit until air flow switch is energized. 115 VAC, 10 AMP rated.

Note: For use with gas fired equipment only with Barber Coleman Flame Safe Guard Control.

 

Timer
Part #31103
Timer, Recycle ESDR453A3

 
 
Transducer, Bellofram
Part #25174
This unit is supplied by a 4 to 20 ma. signal and converts it to a 3 to 15 PSIG output.

 
Type J Thermocouple
Part #25151
High temperature limit located in the return air stream. Same for 0 - 250 or 0 - 400.

 
 
Type J Thermocouple Wire
Part #30935
A special wire (Iron & Constantan) SpecifY length.

 
Waterproof Cord Connector 1/2
Part #30978

 
Wet Bulb Socks
Part #50040
Made from 100% cotton fabric to assure proper evaporation for correct wet bulb reading. Socks are sewn to properly fit wet bulb diameter giving you an accurate wet bulb control.
3"x 5-1/2"
For microprocessor control panels on small ovens. 100 per Package (minimum order). Price is per sock.
 
Wet Bulb Socks
Part #50044
Made from 100% cotton fabric to assure proper evaporation for correct wet bulb reading. Socks are sewn to properly fit wet bulb diameter giving you an accurate wet bulb control.
5-1/2" x 5-1/2"
For microprocessor control panels on largerl ovens. 100 per Package (minimum order). Price is per sock.
 
Wet Bulb Socks
Part #50041
Made from 100% cotton fabric to assure proper evaporation for correct wet bulb reading. Socks are sewn to properly fit wet bulb diameter giving you an accurate wet bulb control.
6"x6"
For pneumatic control panels (programmable-standard, also old two truck ovens) 3/4" diameter sensor. 100 per Package (minimum order). Price is per sock.
 
Wet and Dry Bulb Controller
Part #25002
Two mode controller which operates on the pneumatic null-balance principle, controlling the oven or process temperture (Wet Bulb or Dry Bulb). This part is OBSOLETE.