|
Air Actuator Motor - 3 |
|
|
For old style
clapper damper Part #05131 |
 |
|
Belting, |
|
|
Adjust to size Approximately 8-1/2 ft per fan. Price is per foot. Enter quantity needed as total number of feet. Part #35525 |
 |
|
Exhaust Fan |
|
|
NEW STYLE
EXHAUST FAN (less motor, base, belts, and sheaves) Size: 18" - Static Press: 1/4" - Fan RPM: 1,500 - CFM: 3,500 Part #45143 |
 |
|
Exhaust Fan |
|
|
NEW STYLE
EXHAUST FAN (less motor, base, belts, and sheaves) Size: 18" (for 24" duct) - Static Press: 1/4" - Fan RPM: 2,500 CFM: 7,500 Part #45143 |
|
|
Exhaust Fan |
|
|
Belt driven, 304
S/S, smoke and heat transmitted to 500 F. Fans DO NOT include
motor, motor sheave or belts. Replacement fan baldes, shafts,
and bearing are available. NOTE: Fan motors vary on speed and RPM's according to design. Old style exhaust fans (18" & 24") are no longer available. Only the replacement fan blades, shafts, and bearings. NEW STYLE EXHAUST FAN Size: 12" - Static Press: 1/4" - Fan RPM: 2,000 - CFM: 1,500 Part #45018 |
|
|
Exhaust Fan - Trantorque Bushing |
|
|
Used to hold fan
blade. (new style fans only) Part #35526 |
 |
|
Exhaust Fan Adapter Rings |
|
|
Used to install
18" fan into 24" ductwork. Requires 2 per fan. Part #70553 |
|
|
Exhaust Fan Bearings |
|
|
Fan: 12" - Size:
3/4" Part #35251 |
 |
|
Exhaust Fan Bearings |
|
|
Fan: 24" old
style - Size: 1 - 3/16" Part #35249 |
 |
|
Exhaust Fan Bearings |
|
|
Fan: 18" old
style - Size: 1" Part #35245 |
 |
|
Exhaust Fan Bearings |
|
|
Fan: 18" new
style - Size: 1" Part #35527 |
 |
|
Exhaust Fan Motor |
|
|
5 HP on new 18"
fan into 24" ductwork also requires 2 adapter rings (part
#70553) Part #05022 |
|
|
Exhaust Fan Motor |
|
|
3 HP for new 18"
dia. fans (for 18" ductwork) Part #05162 |
|
|
Exhaust Fan Motor |
|
|
1 HP for 12"
diameter fans Part #05019 |
|
|
Exhaust Fan Replacement Blade |
|
|
24" old style
Part #70359 |
 |
|
Exhaust Fan Replacement Blade |
|
|
18" new style
Part #40148 |
|
|
Exhaust Fan Replacement Blade |
|
|
12" Part #70385 |
|
|
Exhaust Fan Replacement Blade |
|
|
18" old style
Part #70319 |
|
|
Exhaust Fan Shaft |
|
|
18" new style
Part #40150 |
|
|
Exhaust Fan Shaft |
|
|
24" old style
Part #70388 |
|
|
Exhaust Fan Shaft |
|
|
18" old style
Part #70387 |
|
|
Exhaust Fan Shaft |
|
|
12" Part #70386 |
|
|
Fan - Smoke Injection Blade |
|
|
Replacement fan
blade 5/8" dia. bore Part #40085 |
 |
|
Fan - Smoke Injection Complete Assembly |
|
|
S/S fan complete
with - 1 HP motor, 230/460 V, 60 Hz, 3 phase, 1800 RPM Part #45019 |
 |
|
Motor Diaphragms (prior to 1981) |
|
|
For old style
clapper damper Part #05065 |
 |
|
Motor Linkage Kit - Actuator/Damper |
|
|
For old style
clapper damper Part #05132 |
 |
|
Sealant - Tube |
|
|
732 RTV
Silicone, 10.3 oz. Tube Part #15042 |
 |
|
Sealant - Tube |
|
|
ASI 600 F high
temperature Part #15114 |
 |
|
Smoke Duct Elbow |
|
|
Standard 7"
diameter smoke duct elbow with angle rings. Part #70345 |
 |